Product description
For people with a wide variety of needs, the Mule 4010 Trans4x4 utility vehicle is the answer. As a two-seater, the Mule 4010 Trans4x4 can haul a serious amount of lumber, tools, or hay around the farm or construction site. But if job requirements suddenly change, it transforms into a four passenger transport vehicle in just a few easy steps, making it one of the most versatile vehicles in its class. No extra parts to remove, no extra tools required.
Transforming the Mule into a four-seater is as easy as folding the cargo bed walls from the Trans4x4s cab and rotating the back seat into position. Going back to two-person mode and enlarging the cargo bed is achieved by reversing those steps. This innovative design means that whatever the need, a Mule 4010 Trans4x4 can handle it.
Its selectable four-wheel drive, electric power steering (EPS) system and powerful, digital fuel injection (DFI) equipped engine work in conjunction with a fully automatic transmission and locking rear differential to make the versatile Mule 4010 Trans4x4 an outstanding choice for just about any utility vehicle need. Bold, truck-like styling is complemented by smooth car-like controls, a user friendly dashboard layout and a tilting cargo bed.
The Mule 4010 4×4s liquid-cooled 617cc four-stroke V-twin is managed by a digital Electronic Control Unit (ECU) and features a DFI system that compensates for variations in atmospheric pressure, engine and air temperature. The result is smooth and consistent engine starts, crisp throttle response and more precise fuel metering, which helps reduce fuel consumption and reduce emissions. The ECU incorporates an automatic fast idle speed control that activates when the engine is cold, eliminating the need for a manual choke. Its electronics also regulate maximum engine speed, eliminating the need for a mechanical governor. The powerful 617cc V-twin engine is mated to a continuously variable transmission (CVT) that features both high and low range plus reverse. Power is transmitted through a dependable, low-maintenance shaft drive system to a dual-mode rear differential that can be locked to maximize traction, or unlocked to improve handling and minimize ground disturbance when making tight turns. Mule 4010 Trans4x4 drivers can also engage four-wheel drive for extra traction in difficult conditions.
The wheelbase of the Mule 4010 Trans4x4 may be 11.6 inches longer than a standard 4010, but it still offers a tight turning radius and excellent rough terrain capabilities. Electric power steering (EPS) makes the low-effort rack-and-pinion steering system even easier to turn. The EPS reduces steering effort by up to 30 percent, and is a significant boost at low speeds in four-wheel drive, using input from vehicle speed and torque sensors to determine how much assistance is provided by the systems electric motor.
With the forward/reverse, high/low-range gear lever and the four-wheel drive selector all within easy reach on the dash, drivers can focus more attention on negotiating rough or fragile terrain. The Trans4x4 dashboard features an easy-to-see coolant temperature warning light, hour meter, a horn, dual glove boxes, driver, passenger cup holders and a push-button control that activates the headlights. The cab also features retractable rear seat belts and padded rear-passenger grab handle.
Maintenance chores are simplified with an air restrictor gauge in the cab to indicate when the air filter needs to be cleaned or replaced, and the fuse box and oil dipstick are conveniently located beneath the seat for quick access.
With its stylish and rugged bodywork, this four-wheel drive utility is a natural in tough work environments. Its body panels are manufactured from a durable, color-molded plastic that helps hide minor scuffs and scratches. The extendable cab on the Mule 4010 Trans4x4 is surrounded by a large-diameter steel tube frame structure.
The front hood can be opened with the pull of a dash-mounted knob and allows access to a deep storage space equipped with convenient D-rings to help secure cargo. Additionally, two levers make opening and closing the tailgate a secure and easy process. The convenience factor on the Trans4x4 extends beyond easy-access latches or controls; it also boasts owner-friendly features like the winch-ready tabs located under the front grille, which greatly simplify the winch-mounting process.
Effective stopping power is provided by four hydraulically operated, self-adjusting, sealed drum brakes designed to resist contamination from water, mud and other debris. Large 23-inch low-pressure tires provide a comfortable ride, great traction and help minimize impact over a variety of terrain.
A smooth-riding MacPherson strut front suspension works in conjunction with a heavy duty DeDion-type leaf spring rear suspension system to provide the Trans4x4 with an extended-bed 800-pound cargo capacity, or a 400-pound cargo capacity when in four-passenger mode. In addition to its stellar payload capacity, the Mule 4010 Trans4x4 utility vehicle can tow up to 1,200 pounds with an optional draw bar.
Other popular accessories include an enclosed cab, cab heater, snow plow, and soft or hard tops. These and many other Authentic Kawasaki Accessories are available through Kawasaki dealers.
Engine
Four-stroke, liquid-cooled, overhead valve V-twin
Displacement
617cc
Bore x Stroke
76 x 68mm
Compression ratio
10.3:1
Fuel System
Digital Fuel Injection
Air filter
Snorkel-type with cyclone-type two-stage dry replaceable element
Oil filter
Automotive-type spin-on canister
Ignition
Digital electronic
Electrical
12V, 18 amp-hour battery, alternator
Transmission
Continuously variable transmission (CVT) with high and low range, forward, neutral and reverse
Final drive
Shaft, selectable four-wheel drive with dual-mode rear differential
Exhaust
Muffler with USFS-approved spark arrestor
Tires
23×11-10 tubeless
Front suspension / wheelbase
Independent, MacPherson strut / 3.9 in.
Rear suspension / wheelbase
Semi-independent, DeDion axle with leaf springs and shocks / 2.8 in.
Steering
Electric power assisted rack-and-pinion
Brakes
Four-wheel hydraulic drums, sealed
Fuel capacity
6.2 gal.
Curb weight
1,564.8 lbs.
Overall length
130.1 in.
Overall height
75.8 in.
Overall width
58.5 in.
Wheelbase
85.2 in.
Ground clearance
7.1 in.
Roll over protective structure (ROPS)
This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement
Cargo bed dimensions (LxWxH)
50.4 x 47.7 x 11.3 in. / 15.7 cu. ft. (2-passenger mode) ; 30.3 x 47.7 x 11.3 / 9.4 cu. ft. (4-passenger mode)
Load capacity
1,330 lbs.
Cargo Bed Capacity
400 lbs. (4-passenger mode) / 800 lbs. (2-passenger mode)
Towing capacity
1,200 lbs.
Turning radius
12.8 ft.
Top speed
25 mph, governed
Lighting
(2) 30-watt sealed-beam headlights, (2) 5/21-watt taillight/stoplight
Instruments
Parking brake warning light, coolant temperature warning light, horn, 12V DC outlet, speedometer
Color Choices
Dark Royal Red, Woodsman Green, Super Black
Warranty
12 Months
Good Times Protection Plan
12, 24, 36 or 48 months
Engine
Four-stroke, liquid-cooled, overhead valve V-twin
Displacement
617cc
Bore x Stroke
76 x 68mm
Compression ratio
10.3:1
Fuel System
Digital Fuel Injection
Air filter
Snorkel-type with cyclone-type two-stage dry replaceable element
Oil filter
Automotive-type spin-on canister
Ignition
Digital electronic
Electrical
12V, 18 amp-hour battery, alternator
Transmission
Continuously variable transmission (CVT) with high and low range, forward, neutral and reverse
Final drive
Shaft, selectable four-wheel drive with dual-mode rear differential
Exhaust
Muffler with USFS-approved spark arrestor
Tires
23×11-10 tubeless
Front suspension / wheelbase
Independent, MacPherson strut / 3.9 in.
Rear suspension / wheelbase
Semi-independent, DeDion axle with leaf springs and shocks / 2.8 in.
Steering
Electric power assisted rack-and-pinion
Brakes
Four-wheel hydraulic drums, sealed
Fuel capacity
6.2 gal.
Curb weight
1,564.8 lbs.
Overall length
130.1 in.
Overall height
75.8 in.
Overall width
58.5 in.
Wheelbase
85.2 in.
Ground clearance
7.1 in.
Roll over protective structure (ROPS)
This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement
Cargo bed dimensions (LxWxH)
50.4 x 47.7 x 11.3 in. / 15.7 cu. ft. (2-passenger mode) ; 30.3 x 47.7 x 11.3 / 9.4 cu. ft. (4-passenger mode)
Load capacity
1,330 lbs.
Cargo Bed Capacity
400 lbs. (4-passenger mode) / 800 lbs. (2-passenger mode)
Towing capacity
1,200 lbs.
Turning radius
12.8 ft.
Top speed
25 mph, governed
Lighting
(2) 30-watt sealed-beam headlights, (2) 5/21-watt taillight/stoplight
Instruments
Parking brake warning light, coolant temperature warning light, horn, 12V DC outlet, speedometer
Color Choices
Dark Royal Red, Woodsman Green, Super Black
Warranty
12 Months
Good Times Protection Plan
12, 24, 36 or 48 months
Tags: 2012 Kawasaki Mule 4010 Trans 4x4, Kawasaki Mule
